secutron

Adder Graphic Driver Board, c/w 48 Supervised Outputs, Output Connections via Terminals or Ribbon Cable Mounts in Graphic Wall box or BB-5008 or BB...

MR-401 Dual Loop Controller Module 480 points (MGC Devices 4000 Series Compatible)

Booster Panel: Outer Red Door, Main Board, 1 X 30W Amplifier, Backbox, Back Plate, Transformer

Local Operating Console with main display, microphone, remote microphone, backbox and door (RED)

Master Panel: Microphone, Main Display, Main Board, 1 X 30W Amplifier, Dead front, Red Door, Backbox, Back Plate, Transformer

Remote Microphone: Backbox, Red Door, Microphone, RMIC PCB

Weather Resistant Bell Backbox for BL-6B or BL-10B

Backbox/Flush for mounting 6" or 10" Bell. Ceiling or Wall Mount

Surface Mounting Box, Single Gang Red Finish

Red Surface Mount Back Box

White Surface Mount Back Box

Mircom 10" Motorized Aluminum Bell, 23 MA Current Draw, Terminal Connection Mounts on Standard 4" Square Outlet Box by Others Requires MP-101 for M...

Sampling Tube Extension (3.5 ft) for MIX-4010-DUCT

Rubber gasket for MIX-4010-DUCT (Pack of 10 units)

Sampling Tube width up to 1ft (0.3 m) for MIX-4010-DUCT

Sampling Tube 2 ft (0.6m) for use only with MIX-4010-DUCT

Sampling Tube 5 ft (1.5m)Sampling Tube widths 2ft to 5ft (1

Weather Protected Wall/Ceiling Mount Horn, Red (Includes enclosure & device)

Weather Protected Wall Mount Horn/Strobe, Red (Includes enclosure & device)

Red Ceiling Mount Horn/Strobe

Weather Protected Wall Mount Strobe, Red (Includes enclosure & device)

White Wall Mount Strobe

Red Ceiling Mount Strobe

White Ceiling Mount Strobe

6" Round Flush Back Box for Ceiling Speaker/ Speaker Strobes

Mounting Bracket kit for Multi-Modules

Fire Panel Configuration Kit4 With UIMA4

Master Graphic Driver Board c/w, Fire Alarm Common Control Switch Inputs & LED Outputs 32 Supervised Outputs, Output Connections via Terminals ...

Mini-piezo, 24 VDC, red, flush Mount. For Surface Mount use BB-300

Mini-piezo, 24 VDC, white, flush Mount. For Surface Mount use BB-300W

Semi-Flush Backbox for Series 1000 Annunciators (Houses 1 Module) RED Door & Black Backbox (12.75"W X 9"L X 1.85"D without door). Mounts over s...

Weather Protected Backbox for Series 1000 Annunciators (Houses 1 Module) Dimensions: (11-5/32" Height, 12-15/16" Width, 3-1/2" Depth) Rated for ...

Semi-Flush Backbox for Series 1000 Annunciators (Houses 2 Modules) RED Door & Black Backbox. Mounts over standard electrical box by others

Weather Protected Backbox for Series 1000 Annunciators (Houses 2 Module) Dimensions: (17-15/16" Height, 12-15/16" Width, 3-1/2" Depth) Rated for...

Semi-Flush Backbox for Series 1000 Annunciators (Houses 3 Modules) RED Door & Black Backbox (12.75"W X 26.4"L X 1.85"D) without door. Mounts o...

Box for 2 MRI-4000 Multi Modules, Red Door

Box for 6 MRI-4000 Multi Modules, Red Door

Universal Mounting Plate for BL-6B or BL-10B Required When Mounting Bells on Switch or 4" Octagon Outlet Box

EOL Resistor Plate - (One per zone) 3.9K 1/2 Watt, Stainless Steel

Solenoid End of Line Resistor 47K, White Plate

Polarity Reversal & City Tie c/w Alarm, Supervisory & Trouble Transmit Capabilities

Remote Trouble Indicator

Smart Relay Module with Red Enclosure

Addressable Fire Alarm Control Unit c/w 1 x Addressable Loop compatible with MGC Devices 4000 Series only, Black backbox, and RED door enclosure. ...