All

Product OverviewThe UIMA4 is a configuration interface used to program and service MGC fire alarm control panels and related modules. It is compati...

Product OverviewMircom RF Transmitters provide reliable remote access control with 2- or 4-button keyfobs, available in versions with or without 12...

Product OverviewMircom Pull Cord Stations are designed for reliable emergency signaling in commercial and residential applications. Constructed fro...

Product OverviewThe MIX-4050 Sync Module is designed to synchronize MGC notification devices, ensuring strobe flashes align with the audio signal p...

Product OverviewThe TX3-P300-HA is a proximity card reader designed for indoor and outdoor access control applications. Offering up to a 5-inch rea...

Product OverviewMGC’s Emergency Lighting products deliver reliable illumination with a focus on efficiency, quality, affordability, and universal d...

Product Overview  The TH-102 Thermostat Heater is a specialized heating component designed specifically for Mircom TX3 Series and DSPL-420 enclosur...

Product OverviewThe TX3-120C-C is a flush mount paper directory telephone access system designed for indoor applications. Built with a heavy gauge ...

Product OverviewThe MIX-2351AP(A), MIX-2351RAP(A), and MIX-2351TAP(A) Select Series detectors are low-profile, intelligent addressable smoke detect...

Product OverviewThe MRM-810U-EN Conventional Manual Pull Station from Secutron is designed to provide reliable manual fire alarm activation.This pu...

Product OverviewThe MIX-M500DMAP Dual Monitor Module is designed for intelligent two-wire systems and provides two independent 2-wire initiating de...

Product OverviewThe Mircom FS-400-RR Red Wall Mount Strobe is designed for visual fire alarm notification and offers field-selectable candela setti...

Product OverviewMircom Pull Cord Stations are designed for reliable emergency signaling and built for durability and long-term performance. They fe...

Product OverviewThe MIX-4090 Addressable Device Programmer is a compact, lightweight tool designed to program and read addresses for MGC MIX-4000 s...

Product OverviewThis retrofit station is designed to replace older horizontal apartment intercom stations in existing installations. It provides a ...

Product OverviewThe Mircom FHS-400 Wall Mount Horn/Strobes deliver compact, energy-efficient audible/visual notification with advanced LED technolo...

Product OverviewMircom Corridor Dome Lights (EC-104) provide clear visual signaling in corridors and other areas requiring alarm or status indicati...

Product OverviewThe TX3-CX-2-A is a UL Listed two-door controller designed to manage two access points within the TX3 platform. Supporting both RS-...

Product OverviewThe DSPL-420DS Main Display Module is designed to provide a clear, user-friendly interface for fire alarm control systems. Featurin...

Product OverviewThe TX3-TOUCH-S15S-WR-A is a 15″ silver surface-mount weather- and vandal-resistant touch screen video intercom system designed for...

Product OverviewThe MIX-4040 Dual Input Module is an intelligent addressable module designed for alarm, supervisory, or monitoring applications. It...

Replacement Motherboard for Voice Entry, 200 names C models

Product Overview The PS-4P (also known as the PS-1640) is a 16VAC/40VA Plug-In Transformer designed as the primary power source for Mircom’s TX3 Se...

Univ. Std Profile (3/4" latch projection, std. and 5/8"), 12/24 AC/DC with keeper monitor

Product Overview The RB-MD-1397-256 is the Replacement Master CPU Controller Board specifically for Mircom’s TX3-Touch series telephone entry and a...

Back Box Built In Chass Addressable Module

Product OverviewThe FX-3500 Series is an intelligent fire and agent release control panel that is UL/ULC listed for fire alarm and releasing servic...

Product OverviewThe MIX-5351AP(A) / RAP(A) / HAP(A) Select Series Intelligent Thermal Sensors are low-profile, addressable plug-in detectors with r...

Product OverviewThe MIX-5351AP(A) / RAP(A) / HAP(A) Select Series Intelligent Thermal Sensors are low-profile, addressable plug-in detectors with r...

Product Overview  The TX3-CX-1NP-256 is a single-door access control module designed as part of Mircom's TX3-256 series. This version was introduce...

Product OverviewThe TX3-Touch Series Weather Resistant Unit is designed for indoor and outdoor wall mount applications, offering advanced visitor m...

Product OverviewThe TX3-Touch Series weather-resistant unit is a touch screen access control system designed for both indoor and outdoor wall-mount...

Product OverviewThis replacement speaker is designed for TX3 Keypad-C models and TX3 Touch WR models. With a compact 52mm diameter and reliable aud...

Product Overview  The TX3-CLOUD-GATEWAY is a dedicated communication appliance designed to bridge Mircom TX3 Series on-site hardware with the MiVIS...

Product OverviewThe QAA-5415-70 and QAA-5415-25 amplifiers from Mircom** each provide four supervised 15-watt paging/speaker circuits.The QAA-5415-...

Modem Module, Required for remote PC programming over a telephone line

RED WALL.CEILING MOUNT LOW FREQUENCY SOUNDER

WHITE WALL.CEILING MOUNT LOW FREQUENCY SOUNDER

Product OverviewThe TX3-BBCX-4W UL Listed Cabinet is designed to simplify eight-door access control installations by housing all required component...

Product OverviewThe Mircom RPL-LK-WR is a replacement lockset designed for TX3-Touch weather-resistant enclosures. Supplied with one lock and one k...

Product OverviewThe TX3-WRR-22 Wiegand Receiver provides long-range Wiegand access control, ideal for community entrances, parking gates, and other...

Product Overview  The TX3-ER-8-B-256 is an Elevator Restriction Unit from Mircom’s 256 Series, specifically engineered to provide secure, floor-by-...

Replacement secured lock for TX3 Series Lobby Panels

Product Overview  The TX3-IP-256 is a specialized TCP/IP Ethernet-to-Serial bridge module designed specifically for Mircom’s TX3-256 Series control...

Product OverviewThe TX3-CX-4K-A is a four-door access control system kit that houses two 2-door controller boards within a single chassis. Designed...

Product OverviewThe Mircom TX3-CX-2K-A-256 is a two-door access control system kit designed for scalable and secure building access management. Thi...

Product OverviewThe TX3 Wiegand Output is an optional module that allows Mircom’s TX3 Voice Entry systems to interface with any Wiegand-compatible ...

Product OverviewMircom Wiegand RF Transmitters and Receivers offer a high-frequency, long-range identification solution with integrated receiver an...