All

Product OverviewThe SL-5A-C is a high-intensity, solid-state strobe designed to deliver full 360° visual notification in demanding environments. Bu...

Product OverviewThe Potter PAD100-SLCE is an addressable loop expander compatible with Potter IPA and AFC/ARC series fire alarm control panels, ena...

Product Overview The Potter PCVS-2-CRH is a weatherproof and tamper-resistant switch designed to monitor the open position of fire sprinkler contro...

Product Overview The IFS-1 is a liquid flow switch designed for use in water lines or compatible fluids that do not damage brass, stainless steel, ...

Product OverviewThe Potter PAD300-6DB and PAD300-4DB Detector Bases are low-profile, surface-mount bases designed for use with Potter addressable d...

Product Overview The Potter WLS is a float-operated water level switch designed to monitor water levels in sprinkler supply tanks, whether gravity ...

Product Overview The Potter EOLD is an End-of-Line (EOL) diode resistor assembly designed for use in remote locations to supervise releasing circui...

Product Overview The Potter SignaLink Bridge is a fully supervised wireless system that monitors dry-contact devices, such as tamper or flow switch...

Product OverviewThe Potter BBK-1 Back Box is a mounting accessory designed for use with bell signaling devices, including MBA/PBA bells, SL-1224WP,...

Product Overview The Potter PAD300-PD is a low-profile analog addressable photoelectric smoke detector designed for use with fire alarm control pan...

Product Overview The AFC-50 is an analog/addressable releasing fire alarm control panel designed to support up to 50 addressable points, with the o...

Product Overview The GLASS-ROD is a replacement glass rod designed for use in fire alarm pull stations. It provides a reliable breakable element fo...

 Product Overview The Potter 1029030 is a durable replacement part designed for use with VSR series waterflow switches. It ensures reliable perform...

SUPERVISORY SWITCH

Product Overview The Potter PAD200-PD is an analog addressable photoelectric smoke sensor designed for use with fire alarm control panels that supp...

Product Overview The AFC-1000 is a scalable analog/addressable releasing fire alarm control panel designed to support up to 1,270 addressable point...

Product OverviewThe PBA-1206 Vibrating Bell is a compact and efficient signaling device designed for fire alarm, burglar alarm, and general notific...

Product Overview The Potter RA-6500 is an LCD remote annunciator designed for use with PFC-6000 series fire control panels. It communicates via an ...

Product Overview This weatherproof enclosure provides a compact and protective housing solution for electrical or signaling devices, designed to sa...

Product OverviewThe SL-401-R is a weatherproof, low-current strobe designed for reliable visual signaling in fire alarm and emergency notification ...

Product OverviewThe Potter PAD100-6DB and PAD100-4DB Detector Bases are designed for installing Potter addressable smoke and heat detectors. These ...

Product Overview The AMS-37B Gray is a durable industrial magnetic contact designed for demanding environments and versatile openings. UL and ULC l...

Product Overview The CF-200W from Potter is a THERMOFLEX CF Series fixed-temperature heat detector designed for indoor use. It features a low-profi...

Product Overview The RBVS Retrofit Ball Valve Switch is engineered to supervise the fully open position of ball valves used in fire sprinkler syste...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors designed with factory-installed pigtail leads t...

Product OverviewThe Potter Electric Signal LLC CS/CHS-WP Series outdoor colored lens signals are 24VDC weatherproof strobes designed for reliable v...

Product Overview The CHS-24AW-WP is a weatherproof, wall-mount strobe from the CS-WP Series with a fixed 75 candela output, designed for dependable...

Product Overview The Kidde-Fenwal® DETECT-A-FIRE® units are highly reliable fire detection devices used in a wide range of fire protection systems....

Product OverviewThe WRTX-M (Model WRTX-M, Item 3008001) is a fully supervised wireless transmitter designed for use with dry contact sprinkler moni...

Product OverviewThe VSR-3.5 is a highly dependable vane-type waterflow switch designed for use on wet sprinkler systems. Engineered for accuracy an...

Product OverviewThe SL-5A-A is a high-intensity 360° visual strobe engineered for dependable signaling in a wide range of environments, including c...

Product OverviewThe Potter OSYSU Series Outside Screw & Yoke (OS&Y) Valve Supervisory Switch is designed to monitor the open position of OS...

Product Overview The PAD100-PSSA (single-action) activates when the white “T”-bar is pulled downward, while the PAD100-PSDA (dual-action) requires ...

Product OverviewThe Model BVL is a lever-type bleeder valve designed for use as a test point for pressure-operated devices on wet pipe sprinkler sy...

Product Overview The ARC-100 is an analog/addressable releasing fire alarm control panel designed to support up to 100 device addresses, with addit...

Product Overview The ASHP-24SMR PowerTone Amplified Speaker delivers high-intensity, clear audio output for both tone and voice applications. Its p...

Product Overview The VSR-S Series Waterflow Alarm Switch is a vane-type detector designed for use on wet sprinkler systems with pipe sizes ranging ...

Product OverviewThe RM-1000ECS is a remote microphone station enabling operators to initiate paging and activate Emergency Communication System (EC...

Product Overview The PSN-1000 is an intelligent, UL-listed 10-amp notification power supply and P-Link (RS-485) repeater designed for seamless inte...

Product Overview The Potter WRX-R SignaLink Wireless Receiver is a fully supervised wireless bridge receiver designed for use with non-explosion-pr...

Product Overview These vibrating-type bells are designed for fire alarm or general signaling applications, delivering high decibel output while mai...

Product OverviewThe PAD300-DUCTR is an analog addressable duct smoke detector engineered to meet all local codes and NFPA requirements for HVAC duc...

Product Overview The Potter SL-401-C is a weatherproof, low-current strobe light designed for reliable signaling in fire and security applications....

Product OverviewThe Potter SB Series Smoke Detector Base is a 6" polarized base designed for use with Potter smoke detector models IS-24, PS-24, an...

Product Overview The EOLR End-of-Line Resistor Assembly is designed for supervision of Class B IDC and NAC circuits in fire alarm systems. It is in...

Product OverviewThe Potter 4050 Single Action Manual Pull Station is a rigid metal fire alarm pull station with a red finish and raised "FIREALARM"...

Product OverviewThe HUB-M is an Amseco Hold-up Switch featuring a single, recessed button design. This compact device (2" W x 2 5/16" L x 1" H) is ...

(5250075) FIRE PANEL KEY