POTTER

Product Overview The AFC-50 is an analog/addressable releasing fire alarm control panel designed to support up to 50 addressable points, with the o...

Product Overview The AMS-10 Series Mini Surface Mount Contact is a UL Listed, compact contact designed for installation in tight or hard-to-reach s...

Product OverviewThe ARC-100 RB is an analog/addressable releasing fire alarm control panel supporting up to 100 addressable points, with expandable...

Product Overview The ASHP-24SMR PowerTone Amplified Speaker delivers high-intensity, clear audio output for both tone and voice applications. Its p...

Product Overview The CA-6500 Class A Expander from Potter enables Class A wiring for Notification Appliance Circuits (NACs), P-Link circuits, and t...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors designed with factory-installed pigtail leads t...

Product Overview The CHS-24RR Colored Lens Signal is a 24VDC wall-mounted horn/strobe designed for fire and emergency notification, available with ...

135F ROR Heat Detector White

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors engineered with factory-installed pigtail leads...

Ceiling Selectable Strobe, White

Product Overview The Potter CS/CHS Series Colored Lens Signals are low-profile, wall-mount strobes and horn/strobes designed to provide reliable au...

Product OverviewThe Potter DCA-5025 is a dual-channel, 50W audio amplifier designed for use on the proprietary P-Link communication network. Engine...

Product Overview The EBP-401 Long Range Door Annunciator System is a surface-mounted annunciator designed for indoor traffic monitoring. Using acti...

Product Overview The ESZ25S Piezo Alert Buzzer is a single-tone electronic audible device designed for flush mount installation. Operating at 24 VD...

Product Overview The EVAX-100 is a 100-watt voice evacuation panel designed to operate alongside any Fire Alarm Control Panel (FACP). It includes i...

Product OverviewThe EVAX-100R is a robust analog addressable voice evacuation panel designed to operate with any Fire Alarm Control Panel (FACP). I...

Product Overview The Potter EVAX-50/4Z is a voice evacuation system designed with clean dead-front construction, providing reliable audio notificat...

Product Overview The Potter EVD-1C Safe Pak is a UL Listed Electronic Vibration Detector designed for primary protection of safes, vaults, and ATMs...

Product Overview The Potter EVD-2 Electronic Vibration Detector System is UL and ULC Listed for primary protection of safes, vaults, ATMs, and supp...

Product OverviewThe EVX-25E is a 25-watt expander module designed for use with the EVAX 25 Voice Evacuation System, providing an efficient and cost...

Product OverviewThe EVX-OL8 is a versatile LED output module for voice evacuation systems, designed to provide solid-state N.O. dry contacts for sp...

Product OverviewThe EVX-SL8 LED Switch Module by Potter is a control interface for the EVAX voice evacuation system, providing switch selection for...

(5250075) FIRE PANEL KEY

ALERT BEZEL, RED

Product Overview The HUSD-15B Series is a dual-action hold-up switch designed with Form C (SPDT) contacts and engineered to activate an alarm only ...

Product Overview The Potter LSEX-24WMR is a wall-mounted, explosion-proof strobe designed for hazardous locations. Featuring rugged circuitry and a...

Product Overview The Potter MAS Switch is an indoor manual pull station combined with a push-button abort switch, designed for use with any releasi...

Product Overview The Potter MPEX Explosion Proof Manual Fire Alarm Station is engineered for hazardous environments, including Class I, II, and III...

Product Overview The MS Series remote accessory is engineered for use with Air Products and Controls conventional duct smoke detectors, delivering ...

Product Overview The Potter MT-Mini Horn (MTR-120MH / MTW-120MH) is a compact, low-current 120 VAC piezo signaling device designed for indoor fire ...

Product Overview The ODC-59B Overhead Door Contact is engineered for demanding, high-traffic environments where durability and reliable performance...

Product OverviewThe Potter P32-1T-LP is part of Potter’s line of die-cast manual pull stations designed for fire alarm system applications. This du...

(1000444) Red Indoor Surface Backbox

Product Overview The PAD100-LED is an addressable LED module that uses a single SLC loop address when functioning as an indicator. It is designed t...

Product Overview The PAD100-PSSA (single-action) activates when the white “T”-bar is pulled downward, while the PAD100-PSDA (dual-action) requires ...

Product Overview The Potter PAD100-SB is an addressable sounder base designed for flexible fire alarm applications. It features an integrated 6" so...

Product OverviewThe Potter PAD100-SPKB is a wall or ceiling mount adjustable speaker base designed for a wide range of applications. It provides re...

Product Overview The PAD100-ZM Zone Module provides monitoring for either two Class B initiating device circuits or one Class A circuit while occup...

Product Overview The Potter PAD300-PD is a low-profile analog addressable photoelectric smoke detector designed for use with fire alarm control pan...

Product Overview The Piezo Alert is an advanced electronic audible signaling device that delivers a compelling sound while drawing minimal current....

Product Overview The PC-2H6B is a conventional heat detection unit that pairs the PC-2H heat detector with a 6" mounting base for simplified instal...

Product Overview The PC-2P6B pairs the PC-2P photoelectric smoke detector with a 6" mounting base, simplifying installation while delivering depend...