(786) 485-5277
(786) 485-5277
Product OverviewThe WFD25EXP waterflow detector from FIRE-LITE is an explosion‑proof device designed to sense water movement in fire sprinkler syst...
View full details(1430178) REFLECTIVE DETECTOR ADJUSTMENT BRACKET
Product Overview The SSX-82 Series is a high-output, self-contained siren designed for demanding indoor and outdoor warning applications. Deliverin...
View full detailsProduct Overview The CMXC-R-SB is a ceiling mount bracket designed for use with the Federal Signal FSEX-HI. It provides a secure and stable install...
View full detailsProduct OverviewThe EVD-2C Electronic Vibration Detector System is a UL-listed seismic detection solution engineered for primary protection of merc...
View full detailsProduct OverviewThe DP-2 dead front dress panels from FIRE-LITE are designed for use with 411UDAC fire alarm control panels (FACPs). These panels p...
View full detailsProduct OverviewThe ANN-SEC interface module from FIRE-LITE adds an additional ANN-BUS port to compatible fire alarm control panels, increasing wir...
View full detailsProduct OverviewThe recessed Fire Fighter Handset Cabinet from Fire-Lite Alarms is designed for secure in-wall installation and organized storage o...
View full detailsProduct OverviewThe ABF-1DF and ABF-2DF are semi-flush mounting backboxes designed for ACS Series annunciators from Fire-Lite Alarms. The ABF-1DF s...
View full detailsProduct OverviewThis installation kit from FIRE-LITE is designed for use with the FCPS-24S power supply, providing the necessary components to supp...
View full detailsProduct OverviewThe CS-24WAW is a 24VDC colored-lens signaling appliance designed for reliable visual and audible notification in a variety of indo...
View full detailsProduct OverviewThe LDM cable sets from FIRE-LITE are ribbon cable assemblies designed to link LDM-32 or LDM-E32 modules with LEDs or indicator lam...
View full detailsProduct OverviewThe SEISKIT-BB100 is a seismic kit designed for use with BB-100 and BB-200 backboxes. It provides secure mounting for large-capacit...
View full detailsProduct OverviewThe Potter PE Series incorporates advanced LED technology engineered for indoor wall and ceiling-mount notification applications wi...
View full detailsProduct OverviewThe Potter SignaLink™ WR Repeater (Model WR, Item 3008030) is a fully supervised wireless extension device designed to enhance comm...
View full detailsProduct Overview The PSK-1000 is a programmable soft key module designed to provide manual zone control within fire alarm and detection systems. Eq...
View full detailsProduct OverviewThe VSR-3.5 is a highly dependable vane-type waterflow switch designed for use on wet sprinkler systems. Engineered for accuracy an...
View full detailsProduct OverviewThe BG-12 Series manual pull stations from FIRE-LITE are an affordable line of non-coded alarm initiating devices engineered for a ...
View full detailsProduct Overview The Potter MC-1000 Multi-Connect Expander enables up to 63 IPA and AFC/ARC series fire alarm control panels to share a single repo...
View full detailsProduct OverviewThe SEISKIT-COMMENC is a seismic kit designed to securely fasten batteries inside the fire alarm control panel backbox. It is requi...
View full detailsProduct OverviewThe SCA-5070 is a 50W single-channel amplifier integrated into the Potter proprietary P-Link device catalog. The unit includes a st...
View full detailsProduct OverviewThe Potter PE-SPSTWC High Fidelity LED Speaker Strobe combines efficient LED strobe technology with high-performance audio output f...
View full detailsProduct OverviewThe HSC-M High Security Contact is engineered to monitor the open or closed status of safes, vaults, and other high-security enclos...
View full detailsProduct Overview The RA-6500R is an LCD remote annunciator designed for use with the PFC-6000 Series fire alarm control panels. Using an RS-485 com...
View full detailsProduct OverviewThe CPG Signals U-TC is a universal tone card designed for use with the ASHX PowerTone® explosion-proof amplified speaker system in...
View full detailsProduct OverviewThe FSEX-24PMR Explosion-Proof Strobe is a high-intensity visual signaling device engineered for hazardous locations and fire alarm...
View full detailsProduct OverviewThe ZA-42 Zone Adder Module is designed to expand the capabilities of the PFC-5004E fire alarm control panel. With this module inst...
View full detailsProduct Overview The SL-5A-R is a high-performance, high-intensity 360° strobe designed for applications requiring reliable visual notification. Bu...
View full detailsProduct Overview The Potter Remote Test Annunciator (RTA) is designed for installation at a remote location from the main fire alarm control panel....
View full detailsCABLE UL APPROVED HIGH SECURITY CABLE
Product OverviewThe VSG-2 is a flexible vane-type waterflow switch engineered for wet pipe water mist systems where very low flow activation is req...
View full detailsSUPERVISORY SWITCH
Product OverviewThe PFC-6800 PCB is the main control board for the PFC-6800 fire alarm control panel, supporting a single SLC loop expandable to ei...
View full detailsProduct Overview The CR1352 Thermoflex CF/CR Series heat detector is a combination Rate-of-Rise (ROR) and Fixed Temperature sensor designed for 24...
View full detailsProduct Overview The Potter P2S-000, part of the P2 Series, is a high-security magnetic contact engineered for environments requiring enhanced prot...
View full details(1000123) 200F Heat Normally Closed White
The Fire-Lite MBT1 is a municipal box transponder module used between a local energy municipal box and a fire alarm control panel
Product OverviewThis optional cabinet from FIRE-LITE is designed to house up to six modules installed on a CHS-6 chassis. It provides a protective ...
View full detailsProduct OverviewThe Fire-Lite DP-MS2/4 is a dress panel designed for use with MS-2 and MS-4 fire alarm control panels. It mounts inside the cabinet...
View full detailsProduct OverviewThe ANN-LED annunciator module from FIRE-LITE provides clear LED indication of general system faults and zone/point status when con...
View full detailsProduct Overview The PFC-5004E Fire Alarm Control Panel is a microprocessor-based panel designed for small to medium commercial, residential, multi...
View full detailsProduct OverviewThe ANN-LED annunciator module from FIRE-LITE provides LED annunciation of general system status and zone/point activity when used ...
View full detailsProduct Overview The Potter EVD-2 Electronic Vibration Detector System is UL and ULC Listed for primary protection of safes, vaults, ATMs, and supp...
View full detailsProduct OverviewThe PAD100-SM is a single-module speaker interface designed for SLC-based fire alarm systems. The unit features two channel audio i...
View full detailsProduct OverviewThe PFC-5008 is a microprocessor-based conventional fire alarm control panel designed for small to medium-sized commercial, residen...
View full detailsProduct OverviewThe Fire-Lite 411UD is a compact, stand-alone (slave) Digital Alarm Communicator Transmitter (DACT) designed for reliable transmiss...
View full detailsProduct Overview The PS15-2 from Potter is a supervisory pressure-actuated switch designed to monitor deviations in system pressure within automati...
View full detailsProduct OverviewThe BG-12LR and BG-12LRA Agent Release Stations from FIRE-LITE are designed for integration with FIRE-LITE fire alarm control panel...
View full details