(786) 485-5277
(786) 485-5277
50-PT ADDRESSABLE FACP
F.L-198-PT INTELLIGENT..ADDRESSABLE FACP
Addressable Fire Alarm Panel, with 954-Points Capacity, Includes 1-Signaling Line Circuit (159 Detectors+159 Modules), with IPOTS-COM Communicator,...
View full details70V TRANSFORMER CONVERSION MODULE. CONVERTS THE ECC-50/100(E) PRIMARY AMPLIFIER TO A 70V OUTPUT.
REMOTE PAGE UNIT. INCLUDES BUILT-IN MICROPHONE FOR ALL CALL PAGING ALONG WITH MESSAGE CONTROL.
REMOTE MICROPHONE BUILT IN A SMALL ENCLOSURE FOR ALL CALL PAGING.
REPLACEMENT MICROPHONE ONLY
LOCAL OPERATOR CONSOLE. PROVIES A COMPLETE CONTROL INTERFACE LIKE THE ECC-50/100. INCLUDES BUILT IN MICROPHONE FOR ALL CALL PAGING ALONG WITH MES...
View full detailsFIRE FIGHTER TELEPHONE. SYSTEM PROVIDES SECUR AND RELIABLE COMMUNICATIONS FOR FIREFIGHTERS.
CIRCUIT EXPANDER MODULE - PROVIDES CONNECTIONS FOR UP TO SIX STYLE Z (CLAS A) OR STYLE Y (CLASS B) SPEAKER CIRCUITS.
70V, 50 WATT AUDIO AMPLIFIER MODULE. INCREASES THE TOTAL ECC-50/100 POWER OUTPUT TO 100 WATTS OR CAN ALSO BE USED AS A BACK UP AMPLIFIER.
DISTRIBUTED AUDIO AMPLIFIER. EXTERNALLY MOUNTED AMPLIFIER PROVIDES AN ADDITIONAL 50 WATTS OF ADDRESSABLE AUDIO POWER WHEN CONNECTED TO THE ECC-50/...
View full detailsDISTRIBUTED (REMOTE) AUDIO AMPLIFIER WITH BACKUP, 50 WATTS/100 WATTS AT 25VRMS OR 70VRMS.
MULTI-PURPOSE EMERGENCY COMMUNICATION/MASS NOTIFICATION SYSTEM. MAY BE USED WITH ANY UL-LISTED FIRE ALARM CONTROL PANEL OR ECC-50/100 SEAMLESSLY I...
View full detailsDISTRIBUTED AUDIO AMPLIFIER. EXTERNALLY MOUNTED AMPLIFIER PROVIDES AN ADDITIONAL 125 WATTS OF ADDRESSABLE AUDIO POWER WHEN CONNECTED TO THE ECC-50...
View full detailsDRESS PANEL FOR THE MS-2/MS-4
411UDAC INTERNAL DRESS PANEL REQUIRED FOR CANADIAN APPLICATIONS
OPTIONAL COMMUNICATOR FOR REMOTE MONITORING(STANDARD WITH MS-9600UDLS).
FIRE-LITE INTELLIGENT NON-RELAY DUCT DETECTOR INCLUDES SD365R DETECTOR
6-FORM-C RELAYS MODULE
Addressable Relay Module -Built-In Two Form-C Relays
6-INPUT (CLASS B) OR 3-INPUT (CLASS A) NAC/CONTROL MODULE
Addressable Control Module -- One Supervised, Style Y/Z (Class A/B) Notification Appliance (Bell) Circuit.
The CELL-CAB-FL(C) includes a GSM communicator within a metal cabinet enclosure with lock and key and includes an external antenna. The CELL-MOD(C)...
View full detailsADDRESSABLE DUAL RELAY/MONITOR MODULE - TWO INDIVIDUAL RELAY CONTROL AND TWO CLASS B MONITOR CIRCUITS
CLASS A CONVERTER MODULE
4-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder
The Fire-Lite BG-12S is a single action, fire alarm pull station with pigtail connections and a hex lock. This feature-rich, non-coded pull station...
View full detailsAddressable Manual Pull Station, Dual-Action, Key Lock
FIRELITE AGENT RELEASE W/ABORT APPLICATI
DUAL ACTION STATION, RED, TERMINAL BLOCK, KEY LOCK, WITH GASKET AND SB-I/O OUTDOOR BACKBOX, LISTED FOR OUTDOOR USE
DUAL ACTION, RED, TERMINAL BLOCK, KEY LOCK, W/GASKET, LISTED FOR OUTDOOR USE
DUAL ACTION, RED, TERMINAL BLOCK, KEY LOCK, AUXILIARY CONTACTS, LISTED FOR OUTDOORS USING A WBB, OR SB-I/O OUTDOOR BACKBOX
DUAL ACTION, , RED, TERMINALS, KEY LOCK, AUXILIARY CONTACTS
DUAL ACTION STATION, RED, TERMINAL BLOCK, KEY LOCK
Dual-action pull station with SPST N/O switch, screw..terminal connections, hex lock.
CABINET HOLDS UP TO 6 MULTI-ADDRESSABLE MODULES ON CH-6 (SOLD SEPARATELY).
CABINET, HOLDS 1 OR 2 MULTI-ADDRESSABLE MODULES (FIRELITE)
BATTERY BACKBOX – MOUNTS UP TO 2, BAT-12260 BATTERIES
Control Panel Battery Box For House 7 to 18 Amp-Hr Battery
DETECTOR BASE USED FOR WIRELESS DETECTORS. INCLUDES A BUILT-IN MAGNET
Optional secondary ANN-BUS interface module. (Note: Used only with firmware 3.0 or higher)
BACKBOX KIT, SURFACE MOUNT USED WITH N-ANN-80, WHITE
10 RELAY BOARD, MOUNTS IN COMMON ENCLOSURE MS-5UD-3, MS-10UD-7, MRP-2001, MRP-2002, MS-9050, MS-9200UDLS, MS-9600LS & MS-9600UDLS
ANNUNCIATOR MODULE, 10 INPUT ZONES, ALARM(RED), TROUBLE(YELLOW), SUPERVISORY(YELLOW), WHITE BOX
ANNUNCIATOR MODULE, 10 INPUT ZONES, ALARM(RED), TROUBLE(YELLOW), SUPERVISORY(YELLOW)
LITE-CONNECT FIBER MODULE. SHIPS WITH A HARDWARE KIT CONTAINING A GROUND CABLE, A 21� LONG RIBBON CABLE, 2 HEX NUTS, AND 1 SELF-TAPPING..SCREW.
I/O AND LAMP DRIVER