ELSTR-AL WHEELOCK

Product Overview

The Wheelock ELSTR-AL Eluxa wall-mounted strobe is a 24V indoor notification appliance designed for clear emergency signaling with ALERT lettering. It uses energy-efficient LED technology and provides six selectable candela settings (15, 30, 75, 110, 135, 185 cd), supporting flexible application across commercial and industrial environments. Its compact single-gang design and modern appearance streamline installation, while the included mounting plate allows pre-wire and pre-test prior to final device placement. Activation operates through digital communication, and the unit maintains full compatibility with Wheelock RSS-based systems and Exceder LED3 platforms. The device meets UL/ULC requirements and complies with major life safety standards.

Key Features

• Energy-efficient LED technology with industry-low current draw
• Reduced power supply needs, smaller wire gauge, fewer wiring runs
• UL/ULC listed for compatibility with FACPs approved for Wheelock RSS and Exceder LED3
• LED/xenon strobes may be mixed in the same field of view
• Meets strobe synchronization requirements with DSM Sync Modules, PS Power Supplies, and SAFEPATH
• Compact low-profile single-gang design with no visible mounting screws
• ALERT lettering
• Six field-selectable candela options: 15, 30, 75, 110, 135, 185 cd
• Mounting plate with capture hinge for easier installation
• Pre-wire/pre-test capability to verify wiring and ground faults before device installation
• Tool-free configuration using finger-slide switches
• IN/OUT screw terminals accepting #12–#18 AWG
• Compatible with ELSBB, single-gang backboxes, and 4" square boxes (with adapter)
• Complies with NFPA 72 (20 ms light pulse duration)
• UL 1971, UL 1638, UL 464; ULC-S525, ULC-S526
• California State Fire Marshal (CSFM) listed
• ADA/NFPA/ANSI/OSHA compliant
• Indoor use; red housing
• Operating temperature: 32°F to 122°F (0°C to 50°C)
• Dimensions: 1.3 in (D) × 4.54 in (H) × 2.78 in (W)