All

• Interface pour la configuration des panneaux FleXNetTM, FA-300, FX-350, FX-400, FX-2000, FX-3500, FX3318, QX-5000, UDACT 300, MR-2300, MR2350 et ...

• Émetteur à deux boutons avec proximité 125 KHz. Doit être commandé par blocs de 10.

Product OverviewMircom Pull Cord Stations are designed for reliable emergency signaling in commercial and residential applications. Constructed fro...

Product OverviewThe MIX-4050 Sync Module is designed to synchronize MGC notification devices, ensuring strobe flashes align with the audio signal p...

Product OverviewThe MIX-M500DMAP Dual Monitor Module is designed for intelligent two-wire systems and provides two independent 2-wire initiating de...

Product OverviewThe TX3-P300-HA is a proximity card reader designed for indoor and outdoor access control applications. Offering up to a 5-inch rea...

Product OverviewThe MIX-4090 Addressable Device Programmer is a compact, lightweight tool designed to program and read addresses for MGC MIX-4000 s...

Product OverviewThis retrofit station is designed to replace older horizontal apartment intercom stations in existing installations. It provides a ...

Product OverviewThe Mircom FHS-400 Wall Mount Horn/Strobes deliver compact, energy-efficient audible/visual notification with advanced LED technolo...

• Réchauffeur de thermostat pour les applications Sub-Zero. Nécessite une source d'alimentation 24 VAC séparée (PS-24).

Product Overview The Mircom RPL-LK-300 Controller Lock Assembly is designed to provide secure access protection for compatible Mircom control panel...

Product OverviewMircom’s BL-6B and BL-10B Motorized Steel Bells are designed for reliable performance in modern fire alarm systems. Constructed fro...

Product OverviewThe TX3-120C-C is a flush mount paper directory telephone access system designed for indoor applications. Built with a heavy gauge ...

• Capteurs de fumée photoélectriques intelligents à protocole avancé.

Product OverviewThe MRM-810U-EN Conventional Manual Pull Station from Secutron is designed to provide reliable manual fire alarm activation.This pu...

Product OverviewThe MIX-M500MAP Monitor Module is designed for intelligent two-wire systems and provides a 2-wire or 4-wire fault-tolerant initiati...

Product OverviewThe Mircom FS-400-RR Red Wall Mount Strobe is designed for visual fire alarm notification and offers field-selectable candela setti...

Product OverviewThe CFG-300 Configuration Tool is designed for on-site programming of the UDACT-300A. It provides a two-line, 20-character LCD disp...

Product OverviewMircom Pull Cord Stations are designed for reliable emergency signaling and built for durability and long-term performance. They fe...

Product OverviewThe TX3-CX-2-A is a UL Listed two-door controller designed to manage two access points within the TX3 platform. Supporting both RS-...

• Le module d'affichage principal fournit un affichage ACL rétroéclairé de 4 lignes de 20 caractères, des boutons de commande communs et quatre fil...

Product Overview  The RB-FX2000MN is the Replacement Network Main Control Board for Mircom’s FX-2000 series intelligent fire alarm control panels. ...

Product Overview  The Mircom BB-700 is a large, 7-module capacity enclosure designed for the modular expansion of the FX-2000, FleX-Net, and BC-200...

Product OverviewThe IS-489-1 suite station is a surface-mount unit designed for installation on standard single gang electrical boxes. Similar to t...

Product Overview The Mircom RPL-LK-549 is a replacement lock and key assembly designed for the TX3 Series telephone entry and access control system...

Product OverviewThis Clamshell Proximity Card is compatible with Mircom® TX3 systems (CS-MIR-0-0) and is pre-programmed with a 26-bit standard form...

Product OverviewMircom 125 kHz proximity cards and tags are designed for use with compatible proximity readers and electronic access control system...

Product OverviewThe Mircom GL-007K Series 700 Acrylic Break Glass Rods are replacement components designed for use with the MS-700 series. Supplied...

Product OverviewThe MP-300 End-of-Line (EOL) Resistor Plate is designed for use with Mircom conventional fire alarm panels and detection circuits. ...

Product OverviewThe MRM-700 Series 700 Surface Mount Backbox is a red surface-mount enclosure designed for use with compatible Series 700 fire alar...

Product OverviewThe EL-7007GX is a high-quality, energy-efficient LED emergency exit sign designed for indoor use, offering versatile mounting opti...

Product Overview  The Mircom EL-7030A is a Recessed LED Emergency Remote Head designed for clean, architectural aesthetics. Unlike traditional emer...

Product Overview  The Mircom EL-7007RX-180 is an Extended-Run Red LED Exit Sign. This specialized unit is designed for jurisdictions or building ty...

Product Overview  The Mircom EL-7030B is an Architectural Dual Recessed LED Remote Head. It features two independently adjustable gimbal-mounted LE...

Product Overview  The Mircom EL-7007GX-180 is an Extended-Run Green LED Exit Sign. While standard building codes typically require 90 minutes of em...

Product OverviewThe MGC FH-400 Horns provide a compact, energy-efficient audible solution for fire alarm and notification systems. Their low curren...

Product Overview  The RB-MD-1078 is the Replacement Motherboard for Mircom’s TX3-MD-8 multi-door access control cabinet. It acts as the central dis...

Mircom Fire Alarm Key - PKG of 10 (CAT 30)

Mircom EL-7006-6W LED Emergency Light, Large 2x3W Heads, 180-Minute Backup, Thermoplastic

Product OverviewThe TX3-TOUCH-S15S-WR-A is a 15″ silver surface-mount weather- and vandal-resistant touch screen video intercom system designed for...

Product OverviewThe MIX-4040 Dual Input Module is an intelligent addressable module designed for alarm, supervisory, or monitoring applications. It...

Product Overview The PS-4P (also known as the PS-1640) is a 16VAC/40VA Plug-In Transformer designed as the primary power source for Mircom’s TX3 Se...

Univ. Std Profile (3/4" latch projection, std. and 5/8"), 12/24 AC/DC with keeper monitor

Product Overview The RB-MD-1397-256 is the Replacement Master CPU Controller Board specifically for Mircom’s TX3-Touch series telephone entry and a...

Back Box Built In Chass Addressable Module

Product OverviewThe FX-3500 Series is an intelligent fire and agent release control panel that is UL/ULC listed for fire alarm and releasing servic...

Product OverviewThe MIX-5351AP(A) / RAP(A) / HAP(A) Select Series Intelligent Thermal Sensors are low-profile, addressable plug-in detectors with r...

Product OverviewThe MIX-5351AP(A) / RAP(A) / HAP(A) Select Series Intelligent Thermal Sensors are low-profile, addressable plug-in detectors with r...