All

Product OverviewThe IDP-ISO is a Line Isolator Module designed for use on the SLC loop of Honeywell Farenhyt Series fire alarm control panels (FACP...

Product OverviewThe Macurco CM-E1-RF is a low-voltage, residential and light-commercial Carbon Monoxide (CO) detector housed in a specialized, roun...

Product OverviewThe Potter 4050 Single Action Manual Pull Station is a rigid metal fire alarm pull station with a red finish and raised "FIREALARM"...

Product OverviewThe Fire-Lite H365HT is part of the Fire-Lite H365 Series of addressable plug-in thermal detectors, engineered for both performance...

Product OverviewThe ECC-FFT is a dedicated Fire Fighter telephone system that delivers secure and dependable communication for emergency responders...

Product Overview The FFT-FPJ Firefighter Telephone Phone Jack provides a dedicated two-way communication point for firefighters, connecting strateg...

Product OverviewThe Potter AE-14 is a card expansion enclosure engineered to house up to 14 standard-size expansion cards, including SLCE-127, RLY-...

Speaker Hi Candela Ceiling White Weatherproof

Product Overview The AP7 is a compact addressing programmer designed for use with all analog sensors and modules. It enables quick and accurate add...

Product Overview  The PAD300-PCD is an analog addressable combination Photoelectric Smoke and Carbon Monoxide (CO) detector designed f...

Product OverviewThe PAD300-SB is a 6-inch addressable sounder base designed for flexible use across multiple fire alarm applications. Its integrate...

Product OverviewThe Potter PAD300-PHD Analog Photoelectric Smoke and Heat Detector is a UL-listed, addressable combination detector compatible with...

Product OverviewThe Potter PAD300-HD Analog Heat Detector is a UL-listed, addressable heat detection device compatible with any fire alarm control ...

Product OverviewThe 4XZMF from FIRE-LITE is a relay module that provides four zone alarm relays, one system alarm relay, and one system trouble rel...

Product Overview The CMXC-R-SB is a ceiling mount bracket designed for use with the Federal Signal FSEX-HI. It provides a secure and stable install...

Product Overview The Macurco HS-A is a low-current, regulated 24 VDC combination horn and strobe notification appliance outfitted with a high-visib...

Product Overview The Macurco DVP-120B is a building-automation-ready gas detection and ventilation control panel engineered to centralize mechanica...

Product Overview The Potter PAD200-PCD is an analog addressable combination detector that monitors both photoelectric smoke and carbon monoxide (CO...

Product OverviewThe Macurco CD-6MC is a low-voltage, fixed-point Carbon Dioxide (CO2) monitor and transducer engineered specifically for indoor com...

Product OverviewThe MIX-2351AP(A), MIX-2351RAP(A), and MIX-2351TAP(A) Select Series detectors are low-profile, intelligent addressable smoke detect...

Product OverviewThe AE-2 is a compact accessory enclosure built from durable 18-gauge steel and designed to house up to two standard-size expansion...

Product OverviewThe SCA-10070 is a 100-watt, single-channel amplifier designed for use with Potter fire alarm and voice evacuation systems. As part...

(1430584) COMBINED 115dB(A) ALARM HORN & 20CD XENON STROBE - RADIAL TYPE HORN, CLEAR LENS

Weatherproof Speaker/Strobe - "FIRE" Text - Red - NEMA 4X

Weatherproof Speakers/Strobe - Surface Mount Only - "FIRE" Text - White - NEMA 4X

Product Overview The Potter RMS-6T-EXP-WP-LP is a premium, die-cast metal, explosion-proof manual fire alarm pull station designed for use in hazar...

Product Overview  The Gentex GSSW is a high-output, low-profile Speaker/Strobe combination designed specifically for wall-mount applications in voi...

Product OverviewThe MRM-810U-EN Conventional Manual Pull Station from Secutron is designed to provide reliable manual fire alarm activation.This pu...

Product Overview The Potter CR-135MP THERMOFLEX MP Series is a single-circuit, Normally Open heat detector with pigtail leads extending through a s...

Product Overview The FN-ACC Battery Enclosure is designed to securely house backup batteries for FireNET® and FireNET Plus® fire alarm control pane...

Product Overview The Gentex SHRR is a specialized 120VAC wall-mount Smoke Alarm with an Integral 177 Candela Strobe, designed specifically for hote...

Product Overview The FN-300-ULX, FN-400-ULX, FN-600-ULX, and FN-1024-ULX are cost-effective, voltage-regulated remote power extenders designed to p...

Product Overview The PAD100-ZM Zone Module provides monitoring for either two Class B initiating device circuits or one Class A circuit while occup...

Product Overview The RBVS Retrofit Ball Valve Switch is engineered to supervise the fully open position of ball valves used in fire sprinkler syste...

Product OverviewThe Honeywell IDP-RELAY-6 is an addressable relay module designed for use with Farenhyt Series fire alarm control panels (FACPs). I...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors engineered with factory-installed pigtail leads...

Product Overview  The Gentex SSPK24WLPAW is a high-quality Amber Lens Speaker/Strobe designed for wall-mount Mass Notification (MNS) and emergency ...

Product Overview The Potter DRV-50 is an LED driver module designed to interface with fire alarm control panels via an RS-485 (P-Link) connection. ...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms are designed for evacuation signaling in residential and commercial ...

Product Overview The PS-10-EX Pressure Actuated Switch by Potter is engineered for hazardous location fire protection applications, including wet s...

Product Overview  The Gentex GB6-24 is a 6-inch motor-driven fire alarm bell designed for reliable audible signaling in life safety and fire protec...

Product Overview The CA-6500 Class A Expander from Potter enables Class A wiring for Notification Appliance Circuits (NACs), P-Link circuits, and t...

Product Overview The HOCHIKI SOE-24H is a combination smoke and heat detector UL 268 (7th Edition) and UL 521 (7th Edition) listed, designed for hi...

Product Overview The Kidde-Fenwal® DETECT-A-FIRE® units are highly reliable fire detection devices used in a wide range of fire protection systems....

Product Overview The Gentex SR is a high-performance, 120VAC hardwired smoke alarm equipped with Integral Form A/Form C Relay Contacts. Designed to...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms provide combined smoke and CO detection for residential and commerci...