All

Product Overview The Gentex SHRR is a specialized 120VAC wall-mount Smoke Alarm with an Integral 177 Candela Strobe, designed specifically for hote...

Product Overview The FN-300-ULX, FN-400-ULX, FN-600-ULX, and FN-1024-ULX are cost-effective, voltage-regulated remote power extenders designed to p...

Product Overview The PAD100-ZM Zone Module provides monitoring for either two Class B initiating device circuits or one Class A circuit while occup...

Product OverviewThe Honeywell IDP-RELAY-6 is an addressable relay module designed for use with Farenhyt Series fire alarm control panels (FACPs). I...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors engineered with factory-installed pigtail leads...

Product Overview  The Gentex SSPK24WLPAW is a high-quality Amber Lens Speaker/Strobe designed for wall-mount Mass Notification (MNS) and emergency ...

Product Overview The Potter DRV-50 is an LED driver module designed to interface with fire alarm control panels via an RS-485 (P-Link) connection. ...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms are designed for evacuation signaling in residential and commercial ...

Product Overview The PS-10-EX Pressure Actuated Switch by Potter is engineered for hazardous location fire protection applications, including wet s...

Product Overview  The Gentex GB6-24 is a 6-inch motor-driven fire alarm bell designed for reliable audible signaling in life safety and fire protec...

Product Overview The CA-6500 Class A Expander from Potter enables Class A wiring for Notification Appliance Circuits (NACs), P-Link circuits, and t...

Product Overview The HOCHIKI SOE-24H is a combination smoke and heat detector UL 268 (7th Edition) and UL 521 (7th Edition) listed, designed for hi...

Product Overview The Kidde-Fenwal® DETECT-A-FIRE® units are highly reliable fire detection devices used in a wide range of fire protection systems....

Product Overview The Gentex SR is a high-performance, 120VAC hardwired smoke alarm equipped with Integral Form A/Form C Relay Contacts. Designed to...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms provide combined smoke and CO detection for residential and commerci...

Product Overview The Gentex WGECA24-75PWW is a weatherproof, wall-mount Amber Lens Strobe assembly designed for outdoor Mass Notification (MNS) and...

Product Overview The Potter AFC-1000V is an advanced version of the AFC-1000 addressable fire alarm system, now enhanced with integrated voice capa...

Product Overview The GHSLF Series is a low profile, low frequency audible and visible appliance that provides dependable alarms. The horn produces ...

Product OverviewThe Lenel LNL-8000-M5 M Series Controller is designed to facilitate seamless migration from legacy CASI systems, such as Picture Pe...

Product OverviewThe PAD300-DUCTR Analog Addressable Duct Detector is engineered to provide reliable smoke detection within HVAC duct systems and is...

Product OverviewThe Macurco CD6-FCK is a portable, field-use Carbon Dioxide (CO2) Field Calibration Kit engineered specifically to maintain, test, ...

Product Overview The LK/KY-CAT30 is a replacement lock and keyset designed for use with HPS and AMS Series manual pull stations. This spare CAT30 l...

Product Overview The R2ML/H Series Dual Relay Modules are designed to provide flexible and fast response to emergency conditions in intelligent fir...

Product Overview The HCA-RA Remote Annunciator offers a cost-effective and user-friendly solution for remotely monitoring and controlling HCA Serie...

FIRENET PLUS ENCLOSURE TRIM RING, GRAY

FNPB1127US0E0120 2015 Ed. FNP board only w/faceplate, Expandable, 120V

Product Overview This heat detector offers reliable fixed temperature and rate-of-rise detection for dependable fire protection. Designed for stabl...

Product Overview The HSC-L base series is a 6-inch conventional detector base designed for use with Hochiki fixed temperature heat detectors (model...

Product Overview The DCD-190 Fixed Temperature/Rate-of-Rise Heat Detector is designed for areas where high heat output fires are likely or where en...

Product Overview The HSC-4R/12 is a 6-inch, 4-wire conventional detector base with relay, designed for 12VDC operating voltage. It is intended for ...

Product Overview The NS6 / HSC-(X)R series are 6-inch conventional detector bases designed for use with Hochiki conventional fire alarm systems, in...

Product Overview The HSC-221R is a 6-inch conventional detector base designed for use with a wide range of Hochiki conventional fire alarm control ...

Product Overview The Hochiki HPS-DAH is a rugged, Dual-Action manual pull station designed for high-traffic commercial and industrial environments....

Product Overview  The Hochiki HPS-CP is a conventional Break Glass Call Point designed for dependable fire alarm initiation in environments where a...

Product Overview  The Hochiki HPS-DAK-SR is a heavy-duty, Dual-Action manual pull station specifically designed for the manual release of Fire Supp...

Product Overview The Potter WRX-R SignaLink Wireless Receiver is a fully supervised wireless bridge receiver designed for use with non-explosion-pr...

Product Overview The Potter VSR-8 is a vane-type waterflow alarm switch designed for wet sprinkler systems. It is UL Listed, FM Approved, CUL and C...

Product OverviewThe Potter SignaLink™ WR Repeater (Model WR, Item 3008030) is a fully supervised wireless extension device designed to enhance comm...

Product OverviewThe WRTX-M (Model WRTX-M, Item 3008001) is a fully supervised wireless transmitter designed for use with dry contact sprinkler moni...

Product OverviewThe VSR-10 is a vane-type waterflow switch designed for use on wet sprinkler systems, providing dependable flow detection across st...

Product Overview The VSG-4 is a flexible vane-type waterflow switch engineered for wet pipe water mist systems that require reliable alarm...

Product Overview The Potter VSR-4 is a vane-type waterflow switch designed for wet sprinkler systems, providing reliable detection of water movemen...

Product Overview The VSR-5 Waterflow Switch is a vane-type device designed for use on wet sprinkler systems, approved for steel pipe instal...

Product OverviewThe MIX-M500MAP Monitor Module is designed for intelligent two-wire systems and provides a 2-wire or 4-wire fault-tolerant initiati...

Product OverviewThe Mircom FS-400-RR Red Wall Mount Strobe is designed for visual fire alarm notification and offers field-selectable candela setti...

Product Overview The Potter PSN-64 is a conventional notification power supply delivering 6 A of continuous power across four independent outputs. ...

Product Overview The PSN-1000 is an intelligent, UL-listed 10-amp notification power supply and P-Link (RS-485) repeater designed for seamless inte...

Product Overview The PFC-4064 is a compact yet expandable conventional fire alarm control panel designed to monitor all critical components of a fi...