All

Product Overview The Potter PAD200-PCD is an analog addressable combination detector that monitors both photoelectric smoke and carbon monoxide (CO...

WHITE ADDRESSABLE THERMAL PHOTOELECTRIC DETECTOR

Product OverviewThe Macurco CD-6MC is a low-voltage, fixed-point Carbon Dioxide (CO2) monitor and transducer engineered specifically for indoor com...

Product OverviewThe MIX-2351AP(A), MIX-2351RAP(A), and MIX-2351TAP(A) Select Series detectors are low-profile, intelligent addressable smoke detect...

Product OverviewThe AE-2 is a compact accessory enclosure built from durable 18-gauge steel and designed to house up to two standard-size expansion...

Product OverviewThe SCA-10070 is a 100-watt, single-channel amplifier designed for use with Potter fire alarm and voice evacuation systems. As part...

(1430584) COMBINED 115dB(A) ALARM HORN & 20CD XENON STROBE - RADIAL TYPE HORN, CLEAR LENS

Product Overview The Siemens ACEND Series SC-HS-WR-F Horn-Strobe is a wall-mounted, red fire notification appliance designed to deliver reliable au...

Strobe, Wall, White, FIRE

Weatherproof Speaker/Strobe - "FIRE" Text - Red - NEMA 4X

Weatherproof Speakers/Strobe - Surface Mount Only - "FIRE" Text - White - NEMA 4X

Agent Release Module

Product Overview The Potter RMS-6T-EXP-WP-LP is a premium, die-cast metal, explosion-proof manual fire alarm pull station designed for use in hazar...

Product Overview  The Gentex GSSW is a high-output, low-profile Speaker/Strobe combination designed specifically for wall-mount applications in voi...

Product OverviewThe MRM-810U-EN Conventional Manual Pull Station from Secutron is designed to provide reliable manual fire alarm activation.This pu...

Product Overview The Potter CR-135MP THERMOFLEX MP Series is a single-circuit, Normally Open heat detector with pigtail leads extending through a s...

Product Overview The FN-ACC Battery Enclosure is designed to securely house backup batteries for FireNET® and FireNET Plus® fire alarm control pane...

Product Overview The Gentex SHRR is a specialized 120VAC wall-mount Smoke Alarm with an Integral 177 Candela Strobe, designed specifically for hote...

Product Overview The FN-300-ULX, FN-400-ULX, FN-600-ULX, and FN-1024-ULX are cost-effective, voltage-regulated remote power extenders designed to p...

Product Overview The PAD100-ZM Zone Module provides monitoring for either two Class B initiating device circuits or one Class A circuit while occup...

Product OverviewThe Honeywell IDP-RELAY-6 is an addressable relay module designed for use with Farenhyt Series fire alarm control panels (FACPs). I...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors engineered with factory-installed pigtail leads...

Product Overview  The Gentex SSPK24WLPAW is a high-quality Amber Lens Speaker/Strobe designed for wall-mount Mass Notification (MNS) and emergency ...

Product Overview The Potter DRV-50 is an LED driver module designed to interface with fire alarm control panels via an RS-485 (P-Link) connection. ...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms are designed for evacuation signaling in residential and commercial ...

Product Overview The PS-10-EX Pressure Actuated Switch by Potter is engineered for hazardous location fire protection applications, including wet s...

Product Overview  The Gentex GB6-24 is a 6-inch motor-driven fire alarm bell designed for reliable audible signaling in life safety and fire protec...

Product Overview The CA-6500 Class A Expander from Potter enables Class A wiring for Notification Appliance Circuits (NACs), P-Link circuits, and t...

Product Overview The HOCHIKI SOE-24H is a combination smoke and heat detector UL 268 (7th Edition) and UL 521 (7th Edition) listed, designed for hi...

Product Overview The SC Series Multi-Criteria Smoke and Carbon Monoxide Alarms provide combined smoke and CO detection for residential and commerci...

Product Overview The Gentex WGECA24-75PWW is a weatherproof, wall-mount Amber Lens Strobe assembly designed for outdoor Mass Notification (MNS) and...

Product Overview The Potter AFC-1000V is an advanced version of the AFC-1000 addressable fire alarm system, now enhanced with integrated voice capa...

Product Overview The GHSLF Series is a low profile, low frequency audible and visible appliance that provides dependable alarms. The horn produces ...

Product OverviewThe Lenel LNL-8000-M5 M Series Controller is designed to facilitate seamless migration from legacy CASI systems, such as Picture Pe...

Product OverviewThe PAD300-DUCTR Analog Addressable Duct Detector is engineered to provide reliable smoke detection within HVAC duct systems and is...

Product OverviewThe Macurco CD6-FCK is a portable, field-use Carbon Dioxide (CO2) Field Calibration Kit engineered specifically to maintain, test, ...

Product Overview The LK/KY-CAT30 is a replacement lock and keyset designed for use with HPS and AMS Series manual pull stations. This spare CAT30 l...

Product Overview The R2ML/H Series Dual Relay Modules are designed to provide flexible and fast response to emergency conditions in intelligent fir...

Product Overview The HCA-RA Remote Annunciator offers a cost-effective and user-friendly solution for remotely monitoring and controlling HCA Serie...

FIRENET PLUS ENCLOSURE TRIM RING, GRAY

FNPB1127US0E0120 2015 Ed. FNP board only w/faceplate, Expandable, 120V

Product Overview This heat detector offers reliable fixed temperature and rate-of-rise detection for dependable fire protection. Designed for stabl...

Product Overview The HSC-L base series is a 6-inch conventional detector base designed for use with Hochiki fixed temperature heat detectors (model...

Product Overview The DCD-190 Fixed Temperature/Rate-of-Rise Heat Detector is designed for areas where high heat output fires are likely or where en...

Product Overview The HSC-4R/12 is a 6-inch, 4-wire conventional detector base with relay, designed for 12VDC operating voltage. It is intended for ...

Product Overview The NS6 / HSC-(X)R series are 6-inch conventional detector bases designed for use with Hochiki conventional fire alarm systems, in...

Product Overview The HSC-221R is a 6-inch conventional detector base designed for use with a wide range of Hochiki conventional fire alarm control ...

Product Overview The Hochiki HPS-DAH is a rugged, Dual-Action manual pull station designed for high-traffic commercial and industrial environments....