POTTER

Product Overview The Potter 1029030 is a durable replacement part designed for use with VSR series waterflow switches. It ensures reliable performa...

Product Overview The Reflector Wall Bracket in white is a mounting accessory designed to provide secure and stable installation for compatible devi...

Product Overview The Kidde-Fenwal® DETECT-A-FIRE® units are highly reliable fire detection devices used in a wide range of fire protection systems....

Product Overview The Kidde Fenwal 12-H27121-020-08-0T DETECT-A-FIRE® (D-A-F) Vertical Detector is a highly reliable heat detection device used for ...

Product OverviewThe Potter 4050 Single Action Manual Pull Station is a rigid metal fire alarm pull station with a red finish and raised "FIREALARM"...

HEAT DETECTOR HEAD, RATE OF RISE, REQUIRES BASE

Product Overview The 70V-1000 is an expansion module designed to increase the output voltage of the DCA-5025 and DCA-10025 amplifiers to 70V. It in...

Product Overview The AB-4 is a 4-inch addressable detector base designed for mounting smoke or heat sensors to an electrical backbox. It features c...

Product OverviewThe ABORT-R is a stainless-steel abort switch designed for direct connection to the abort terminals of Potter releasing control pan...

Product OverviewThe Potter AE-14 is a card expansion enclosure engineered to house up to 14 standard-size expansion cards, including SLCE-127, RLY-...

Product OverviewThe AE-2 is a compact accessory enclosure built from durable 18-gauge steel and designed to house up to two standard-size expansion...

Product OverviewThe AE-8 is an expansion enclosure designed to support up to eight standard-size expansion cards, including modules such as the SLC...

Product Overview The AFC-100 is an analog-addressable fire alarm control panel from Potter, capable of supporting 100 total addresses. System capac...

Product Overview The AFC-1000 is a scalable analog/addressable releasing fire alarm control panel designed to support up to 1,270 addressable point...

Product Overview The Potter AFC-1000V is an advanced version of the AFC-1000 addressable fire alarm system, now enhanced with integrated voice capa...

Product Overview The AFC-50 is an analog/addressable releasing fire alarm control panel designed to support up to 50 addressable points, with the o...

Product Overview The AMS-10 Series Mini Surface Mount Contact is a UL Listed, compact contact designed for installation in tight or hard-to-reach s...

Product Overview The AMS-37B Gray is a durable industrial magnetic contact designed for demanding environments and versatile openings. UL and ULC l...

Product Overview The AMS-39CVS Standard Surface Mount Contact is a UL listed solution designed to protect a wide range of openings, including man d...

Product Overview The ARC-100 is an analog/addressable releasing fire alarm control panel designed to support up to 100 device addresses, with addit...

Product OverviewThe ARC-100 RB is an analog/addressable releasing fire alarm control panel supporting up to 100 addressable points, with expandable...

Product Overview The ARM-1 is a 4PDT Auxiliary Relay Module designed for activation by 24VDC indicating and/or releasing circuits with polarity rev...

Product Overview The ASHP-24SMR PowerTone Amplified Speaker delivers high-intensity, clear audio output for both tone and voice applications. Its p...

Product OverviewThe CPG Signals ASHX PowerTone is an explosion-proof amplified speaker engineered for hazardous location deployment. The unit deliv...

Product OverviewThe Potter BBK-1 Back Box is a mounting accessory designed for use with bell signaling devices, including MBA/PBA bells, SL-1224WP,...

Product Overview The BUA-1000 is a dual-channel backup amplifier and booster designed to maintain audio output if a primary dual-channel amplifier ...

(3992361) Class A Expander for PFC-4064

Product OverviewThe Potter CA-6075 is a Class A Expander designed for use with AFC, ARC, IPA, and PFC series addressable fire alarm control panels....

Product Overview The CA-6500 Class A Expander from Potter enables Class A wiring for Notification Appliance Circuits (NACs), P-Link circuits, and t...

Product Overview The CA2Z Class A Module is engineered for the PFC-4410RC Fire Control Releasing Panel, enabling the conversion of two Class B init...

Product Overview The MP Series THERMOFLEX® detectors are single-circuit, normally open heat sensors designed with factory-installed pigtail leads t...

Product Overview The THERMOFLEX® CF / CF-CR Series standard heat detectors are designed for reliable fixed-temperature fire detection in a wide ran...

(1000128) FIXED HEAT DETECTOR 200 DERGREES BOTH NORMALLY OPEN CONTACTS WHITE

Product Overview The Potter CF-200MP THERMOFLEX CF-MP Series Heat Detector is a single-circuit, normally open detector with pigtail leads extending...

(1000123) 200F Heat Normally Closed White

Product Overview The CF-200W from Potter is a THERMOFLEX CF Series fixed-temperature heat detector designed for indoor use. It features a low-profi...

Product Overview The MP Series THERMOFLEX heat detectors are single-circuit devices with normally open contacts, designed with sealed pigtail lead ...

Product Overview The CHS-24AW-WP is a weatherproof, wall-mount strobe from the CS-WP Series with a fixed 75 candela output, designed for dependable...

Product OverviewThe Potter Electric Signal LLC CS/CHS-WP Series outdoor colored lens signals are 24VDC weatherproof strobes designed for reliable v...

Product Overview The CHS-24RR Colored Lens Signal is a 24VDC wall-mounted horn/strobe designed for fire and emergency notification, available with ...

Product Overview The CHS-24RW-WP is a weatherproof, wall-mount strobe designed for outdoor emergency signaling applications. Offering a fixed 75 cd...

Product Overview The CMXC-R-SB is a ceiling mount bracket designed for use with the Federal Signal FSEX-HI. It provides a secure and stable install...

Product OverviewThe Potter CPS-24 Conventional Photoelectric Smoke Detector is a highly reliable smoke detection device designed for both standard ...

Product Overview The CPSD-24V is a conventional photoelectric smoke detector designed for reliable fire detection in open areas. Compliant with UL ...

Product Overview The Potter CPSHD-24H is a conventional combination photoelectric smoke and heat detector designed for reliable fire detection in o...

 Product Overview The CR1352 Thermoflex CF/CR Series heat detector is a combination Rate-of-Rise (ROR) and Fixed Temperature sensor designed for 24...

(1000151) 135F ROR DUAL NORMALLY OPEN HEAT DETECTOR

Product Overview The Potter CR-135MP THERMOFLEX MP Series is a single-circuit, Normally Open heat detector with pigtail leads extending through a s...